FOUR SEASONS SHAPED GABLE FRAMES A) Continuous Structural Eaves Beam - Fits under gable frame to provide definite break between the frames below to the roof above. B) Fully Sculptured Guttering - Designed to blend in with frame and roof system. The use of a front gutter also eliminates the need for an outlet at either side of the conservatory. C) Any Window System - Can be manufactured using any Window/Door System (60,62,65 or 70mm) below the complete K2 roof. D) K2 Gable Frame - Fabricated using K2 window profile is welded down to a point & finishes at the rafter pivot point eliminating the need for any infill panels. E) Wall End Rafter - Is 58mm wide so it sits very cleanly without overhang on top of K2 gable frame. The wall end fascia trim provides perfect weathering for gable frame. F) K2 Gable Frame - The 60mm 5 chamber K2 window profile with its sculptured paint-flow edges matches internal eaves cover mouldings to perfection. G) Internal Eaves Cover - A front eaves beam provides continuation of internal eaves cover which not only gives a more uniform appearance but also gives a definite break between the lower frames and the gable frame above.